Outil de coupe de tube de tube Bowden Capricorne
MacEwen3D
5.0 star rating 4 Reviews
Prix régulier
$7.99
$6.50
Solde
We are pleased to add Capricorn Brand to our recommended CR-10 printer upgrades and handy tools. This Capricorn tubing cutter is a huge time saver, and really helps getting square cuts in on all bowden tubing in one step. Just squeeze. It has a guide to hold tubing square, and, a center point blade to start the cut in the center.
Brand: Capricorn
Length of Tool: 3 inch
To properly seat your Bowden tube, it is imperative to have a clean, square, end. Without this, you risk oozing, or worse, clogging, in the hot end. This super-sharp tubing cutter is the perfect tool for obtaining a clean, square cut in your tubing, every time.
Features a stainless steel blade and spring. The housing is made from tough durable plastic. There's a hole through the end so you can attach it to a key chain, hang it on a necklace, etc., so you won't lose it.
Fits up to 6mm diameter tubing. Can also be used to cut filament. (Do not use as a wire cutter or you will dull the blade, however.)
We've also tested these for durability, and dropped from a height of over 1 meter onto a concrete floor without damage.
Similar cutters sell for $10 or more online, use a plastic spring, and do not have a hole for hanging!
Review Title
Review Content
Real Reviews From Real Customers
Reviews carousel
Carousel arrows
4.8 star rating 480 Reviews

Micro SD Card Extension Cable - Flexible Ribbon Cable
5.0 star rating 04/01/19
prompt response
Spent 30 minutes on phone explaining something. Also detailed email. Good followup.
Blaine N.
5.0 star rating 04/01/19
prompt response

Micro SD Card Extension Cable - Flexible Ribbon Cable
Spent 30 minutes on phone explaining something. Also detailed email. Good followup.
Blaine N.

E3D V6 Clone Hotend PTFE with Volcano Heater Block and Volcano Brass Nozzle Pack 12V (all metal tube is optional)
5.0 star rating 10/05/21
Great deal. Very happy!!
So I bought the V6 clone with volcano hotend with low expectations because it's a clone and I haven't bought any of that stuff bef...
Read More
Andrew H.
5.0 star rating 10/05/21
Great deal. Very happy!!

E3D V6 Clone Hotend PTFE with Volcano Heater Block and Volcano Brass Nozzle Pack 12V (all metal tube is optional)
So I bought the V6 clone with volcano hotend with low expectations because it's a clone and I haven't bought any of that stuff bef...
Read More
Andrew H.

Creality CR-10 Hotend Threaded Heatsink Block Replacement, includes block and spare PTFE (teflon) tube.
5.0 star rating 03/04/18
Super slick and tough, Capricon Bowden Tube by Mac Ewe...
This Bowden Tube s the best I've tried: Its tougher and very low resistance and holds up to heat & wear better compared to typ...
Read More
Celibrity
5.0 star rating 03/04/18
Super slick and tough, Capricon Bowden Tube by Mac Ewe...

Creality CR-10 Hotend Threaded Heatsink Block Replacement, includes block and spare PTFE (teflon) tube.
This Bowden Tube s the best I've tried: Its tougher and very low resistance and holds up to heat & wear better compared to typ...
Read More
Celibrity

CR-10 CR-10-S4 CR-10-S5 Replacement 30mm PTFE (Teflon) Thermal Threaded Tubes 30mm (Pack of 5)
5.0 star rating 10/11/17
CR-10 parts
Awesome seller. Highly recommend. You won't be disappointed.
Todd I.
5.0 star rating 10/11/17
CR-10 parts

CR-10 CR-10-S4 CR-10-S5 Replacement 30mm PTFE (Teflon) Thermal Threaded Tubes 30mm (Pack of 5)
Awesome seller. Highly recommend. You won't be disappointed.
Todd I.

Upgraded Tool Steel Extruder Gear for Creality Cr-10, Ender 2, Ender 3, Afinibot
5.0 star rating 02/02/21
Excellent replacement
would recommend polishing with toothpaste and a toothbrush to remove some of the machining dust to keep the filament clean.
Jose C.
5.0 star rating 02/02/21
Excellent replacement

Upgraded Tool Steel Extruder Gear for Creality Cr-10, Ender 2, Ender 3, Afinibot
would recommend polishing with toothpaste and a toothbrush to remove some of the machining dust to keep the filament clean.
Jose C.

Upgraded Replacement Flexible Filament MK8 Extruder Aluminum Drive Feed for CR-10, Ender 3, (CR-10S, CR-10-S4, and CR-10-S5. Afinibot A31, CR-10...
5.0 star rating 05/03/24
Best extruder
Fixed all my extrusion issues. Now i just need to fix everything else.
Brian O.
5.0 star rating 05/03/24
Best extruder

Upgraded Replacement Flexible Filament MK8 Extruder Aluminum Drive Feed for CR-10, Ender 3, (CR-10S, CR-10-S4, and CR-10-S5. Afinibot A31, CR-10...
Fixed all my extrusion issues. Now i just need to fix everything else.
Brian O.

Creality CR-10 Complete hotend replacement, includes Bowden tube, thermistor, and heater cartridge.
5.0 star rating 09/06/17
Exactly what I needed
I had modified the original hot end with a all metal tube. This did not work and needed an exact replacement. This worked perfeclt...
Read More
Alan B.
5.0 star rating 09/06/17
Exactly what I needed

Creality CR-10 Complete hotend replacement, includes Bowden tube, thermistor, and heater cartridge.
I had modified the original hot end with a all metal tube. This did not work and needed an exact replacement. This worked perfeclt...
Read More
Alan B.

Replacement CR-10 CR-10-S4 Control Board Mainboard
5.0 star rating 10/10/17
Upgraded Motherboard
Easy to install and much improved software over the original.
Jared H.
5.0 star rating 10/10/17
Upgraded Motherboard

Replacement CR-10 CR-10-S4 Control Board Mainboard
Easy to install and much improved software over the original.
Jared H.

CR-10 CR-10-S4 CR-10-S5 12V Replacement Part Cooling Fan
5.0 star rating 05/07/22
Got exactly what I needed.
Need I say more? I asked for a fan and received that fan and a couple suckers extra. He also included a helpful insert on hotends ...
Read More
Anthony W.
5.0 star rating 05/07/22
Got exactly what I needed.

CR-10 CR-10-S4 CR-10-S5 12V Replacement Part Cooling Fan
Need I say more? I asked for a fan and received that fan and a couple suckers extra. He also included a helpful insert on hotends ...
Read More
Anthony W.

Micro SD Card Extension Cable - Flexible Ribbon Cable
5.0 star rating 04/01/19
prompt response
Spent 30 minutes on phone explaining something. Also detailed email. Good followup.
Blaine N.
5.0 star rating 04/01/19
prompt response

Micro SD Card Extension Cable - Flexible Ribbon Cable
Spent 30 minutes on phone explaining something. Also detailed email. Good followup.
Blaine N.

E3D V6 Clone Hotend PTFE with Volcano Heater Block and Volcano Brass Nozzle Pack 12V (all metal tube is optional)
5.0 star rating 10/05/21
Great deal. Very happy!!
So I bought the V6 clone with volcano hotend with low expectations because it's a clone and I haven't bought any of that stuff bef...
Read More
Andrew H.
5.0 star rating 10/05/21
Great deal. Very happy!!

E3D V6 Clone Hotend PTFE with Volcano Heater Block and Volcano Brass Nozzle Pack 12V (all metal tube is optional)
So I bought the V6 clone with volcano hotend with low expectations because it's a clone and I haven't bought any of that stuff bef...
Read More
Andrew H.

Creality CR-10 Hotend Threaded Heatsink Block Replacement, includes block and spare PTFE (teflon) tube.
5.0 star rating 03/04/18
Super slick and tough, Capricon Bowden Tube by Mac Ewe...
This Bowden Tube s the best I've tried: Its tougher and very low resistance and holds up to heat & wear better compared to typ...
Read More
Celibrity
5.0 star rating 03/04/18
Super slick and tough, Capricon Bowden Tube by Mac Ewe...

Creality CR-10 Hotend Threaded Heatsink Block Replacement, includes block and spare PTFE (teflon) tube.
This Bowden Tube s the best I've tried: Its tougher and very low resistance and holds up to heat & wear better compared to typ...
Read More
Celibrity

CR-10 CR-10-S4 CR-10-S5 Replacement 30mm PTFE (Teflon) Thermal Threaded Tubes 30mm (Pack of 5)
5.0 star rating 10/11/17
CR-10 parts
Awesome seller. Highly recommend. You won't be disappointed.
Todd I.
5.0 star rating 10/11/17
CR-10 parts

CR-10 CR-10-S4 CR-10-S5 Replacement 30mm PTFE (Teflon) Thermal Threaded Tubes 30mm (Pack of 5)
Awesome seller. Highly recommend. You won't be disappointed.
Todd I.

Upgraded Tool Steel Extruder Gear for Creality Cr-10, Ender 2, Ender 3, Afinibot
5.0 star rating 02/02/21
Excellent replacement
would recommend polishing with toothpaste and a toothbrush to remove some of the machining dust to keep the filament clean.
Jose C.
5.0 star rating 02/02/21
Excellent replacement

Upgraded Tool Steel Extruder Gear for Creality Cr-10, Ender 2, Ender 3, Afinibot
would recommend polishing with toothpaste and a toothbrush to remove some of the machining dust to keep the filament clean.
Jose C.

Upgraded Replacement Flexible Filament MK8 Extruder Aluminum Drive Feed for CR-10, Ender 3, (CR-10S, CR-10-S4, and CR-10-S5. Afinibot A31, CR-10...
5.0 star rating 05/03/24
Best extruder
Fixed all my extrusion issues. Now i just need to fix everything else.
Brian O.
5.0 star rating 05/03/24
Best extruder

Upgraded Replacement Flexible Filament MK8 Extruder Aluminum Drive Feed for CR-10, Ender 3, (CR-10S, CR-10-S4, and CR-10-S5. Afinibot A31, CR-10...
Fixed all my extrusion issues. Now i just need to fix everything else.
Brian O.

481
4.8 star rating Certified reviews
Powered by YOTPO